Ref: 02880011
Title: Installing New RLL Hard Drive in Old 3Server/CME
Date: 01/25/88

Copyright 3Com Corporation, 1991.  All rights reserved.

To install a new 70 MB hard drive originally formatted for an RLL
controller in an old 3Server with a CME board, follow this procedure:

1.  When connecting the new 70 MB drive to the cabling, make sure the
edge with the blue or red stripe is closest to the power
connection of the hard drive.

2.  Bring server up under thumbwheel 4.

3.  When "disk error" appears on lcd, strobe past. (This is
expected because Ctrlr doesn't recognize the formatting).

4.  When the Ethernet address appears, go through normal 3Console
steps.

5.  Take the error map you received with the drive and enter the
information in 3Disk under the format option so you will have
a new error map and a newly formatted drive.
