Subject: PDP-8 Frequently Asked Questions (posted every other month)
Date: 8 Apr 1996 08:08:08 GMT
Summary: Answers to common questions about antique DEC PDP-8 computers.
.Those posting to alt.sys.pdp8 should read this.


Frequently Asked Questions about the DEC PDP-8 computer.

.By Douglas Jones, jones@cs.uiowa.edu
.(with help from many folks)

The most recent version of this file is available by anonymous FTP from:

.ftp://rtfm.mit.edu/pub/usenet/alt.sys.pdp8
.ftp://ftp.uu.net/usenet/news.answers/dec-faq
.ftp://src.doc.ic.ac.uk:/pub/usenet/news.answers/alt.sys.pdp8
.ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-8/docs

Automatic translations of this document to HTML format (as used by World Wide
Web) are available from:

.http://www.cis.ohio-state.edu/hypertext/faq/usenet/dec-faq/top.html
.http://www.smartpages.com/bngfaqs/alt/sys/pdp8/top.html
.http://www.cs.ruu.nl/wais/html/na-dir/dec-faq/.html

An obsolete version of this file is available on the Walnut Creek USENET
FAQ CDROM.

This posting conforms to RFC1153 USENET digest format (with exceptions due
to the fact that it is not really a digest).


Contents:

.What is a PDP?
.What is a PDP-8?
.What is the PDP-8 instruction set?
.What does PDP-8 assembly language look like?
.What character sets does the PDP-8 support?
.What different PDP-8 models were made?
.What about the LINC-8 and PDP-12?
.Where can I get a PDP-8 today?
.Where can I get PDP-8 documentation?
.What operating systems were written for the PDP-8?
.What programming languages were supported on the PDP-8?
.Where can I get PDP-8 software?
.Where can I get additional information?
.What use is a PDP-8 today?
.Who's Who?

----------------------------------------------------------------------

Subject: What is a PDP?

In 1957, Ken Olson and Harlan Anderson founded Digital Equipment
Corporation (DEC), capitalized at $100,000, and 70% owned by American
Research and Development Corporation.  The founders wanted to call the
company Digital Computer Corporation, but the venture capitalists
insisted that they avoid the term Computer and hold off on building
computers.  With facilities in an old woolen mill in Maynard
Massachusetts, DEC's first product was a line of transistorized digital
"systems modules", plug-in circuit boards with a few logic gates per
board.  Starting in 1960, DEC finally began to sell computers (the
formal acceptance of the first PDP-1 by BBN is reported in Computers
and Automation, April 1961, page 8B).  Soon after this, there were
enough users that DECUS, the Digital Equipment Computer User's Society
was founded.

DEC's first computer, the PDP-1, sold for only $120,000 at a time when
other computers sold for over $1,000,000.  (A good photo of a PDP-1 is
printed in Computers and Automation, Dec. 1961, page 27).  DEC quoted
prices as low as $85,000 for minimal models.  The venture capitalist's
insistance on avoiding the term computer was based on the stereotype
that computers were big and expensive, needing a computer center and a
large staff; by using the term Programmable Data Processor, or PDP, DEC
avoided this stereotype.  For over a decade, all digital computers sold
by DEC were called PDPs.  (In early DEC documentation, the plural form
"PDPs" is used as a generic term for all DEC computers.)

In the early 1960's, DEC was the only manufacturer of large computers
without a leasing plan.  IBM, Burroughs, CDC and other computer
manufacturers leased most of their machines, and many machines were
never offered for outright sale.  DEC's cash sales approach led to the
growth of third party computer leasing companies such as DELOS, a
spinoff of BB&N.

DEC built a number of different computers under the PDP label, with a
huge range of price and performance.  The largest of these are fully
worthy of large computer centers with big support staffs.  Some early
DEC computers were not really built by DEC.  With the PDP-3 and LINC,
for example, customers built the machines using DEC parts and
facilities.  Here is the list of PDP computers:

    MODEL  DATE  PRICE     BITS  COMMENTS
    =====  ====  ========  ====  =====
    PDP-1  1960  $120,000  18    DEC's first computer
    PDP-2            NA    24    Never built?
    PDP-3            NA    36    One built by a customer, not by DEC.
    PDP-4  1962   $60,000  18    Predecessor of the PDP-7.
    PDP-5  1963   $27,000  12    The ancestor of the PDP-8.
    PDP-6  1964  $300,000  36    A big computer; 23 built, most for MIT.
    PDP-7  1965   $72,000  18    Widely used for real-time control.
    PDP-8  1965   $18,500  12    The smallest and least expensive PDP.
    PDP-9  1966   $35,000  18    An upgrade of the PDP-7.
    PDP-10 1967  $110,000  36    A PDP-6 followup, great for timesharing.
    PDP-11 1970   $10,800  16    DEC's first and only 16 bit computer.
    PDP-12 1969   $27,900  12    A PDP-8 relative.
    PDP-13           NA          Bad luck, there was no such machine.
    PDP-14                       A ROM-based programmable controller.
    PDP-15 1970   $16,500  18    A TTL upgrade of the PDP-9.
    PDP-16 1972      NA    8/16  A register-transfer module system.

Corrections and additions to this list are welcome!  The prices given
are for minimal systems in the year the machine was first introduced.
The bits column indicates the word size.  Note that the DEC PDP-10
became the DECSYSTEM-20 as a result of marketing considerations, and
DEC's VAX series of machines began as the Virtual Address eXtension of
the never-produced PDP-11/78.

It is worth mentioning that it is generally accepted that the Data
General Nova (see photo, Computers and Automation, Nov. 1968, page 48)
grew out of the PDP-X, a 16-bit multi-register version of the PDP-8
designed by Edson DeCastro (the designer of the PDP-5; his name appears
on many of the blueprints of later PDP-8 systems up through the PDP-8/L)
A prototype PDP-X was built at DEC; this and a competing 16-bit design
were apparently submitted to Harold McFarland at Carnegie-Mellon
University for evaluation; McFarland (and perhaps Gordon Bell, who was
at C-MU at the time) evaluated the competing designs and rejected both
in favor of what we now know as the PDP-11.  Some speculate that Bell
rejected the Nova design because the competing proposal used the
register-transfer notation he had introduced in "Bell and Newell,
Computer Structures -- Readings and Examples".  An alternate story is
that the reason DEC never produced a PDP-13 was because the number 13
had been assigned to what became the Nova; these stories are unlikely.
In any case, DeCastro did found Data General, and neither DEC nor Data
General talk much about the connection between the PDP-X and the Nova.

Today, all of the PDP machines are in DEC's corporate past, with the
exception of the PDP-11 family, which survives as a line of
microcomputers.

Of course, occasionally, some lab builds a machine out of DEC hardware
and calls it a PDP with a new number.  For example, the Australian
Atomic Energy Commission once upgraded a PDP-7 by adding a PDP-15 on
the side; they called the result a PDP-22.

------------------------------

Subject: What is a PDP-8?

The PDP-8 family of minicomputers were built by Digital Equipment
Corporation between 1965 and 1990, although it is worth noting that the
term minicomputer first came into prominence after the machine was
introduced.  The first use of the term appears to have been made by
the head of DEC's operations in England, John Leng.  He sent back a
sales report that started: "Here is the latest minicomputer activity
in the land of miniskirts as I drive around in my [Austin] Mini Minor."
The term quickly became part of DEC's internal jargon and spread from
there; the first computer explicitly sold as a minicomputer, though,
was made by by Interdata (See the Interdata ad in Computers and
Automation, May 1968, page 10).

The PDP-8 was largely upward compatible with the PDP-5, a machine that
was unveiled on August 11, 1963 at WESCON, and the inspiration for that
machine came from two earlier machines, the LINC and the CDC 160.  All
of these machines were characterized by a 12 bit word with little or no
hardware byte structure, typically 4K words of memory, and simple but
powerful instruction sets.

Although some people consider the CDC 160 the first minicomputer, the
PDP-8 was the definitive minicomputer.  By late 1973, the PDP-8 family
was the best selling computer in the world, and it is likely that it was
only displaced from this honor by the Apple II (which was displaced by
the IBM PC).  Most models of the PDP-8 set new records as the least
expensive computer on the market at the time of their introduction.
The PDP-8 has been described as the model-T of the computer industry
because it was the first computer to be mass produced at a cost that
just about anyone could afford.

C. Gordon Bell has said that the basic idea of the PDP-8 was not really
original with him.  He gives credit to Seymour Cray (of CDC and later
Cray) for the idea of a single-accumulator 12 bit minicomputer.  Cray's
CDC 160 family (see CACM, march 1961, photo on page 244, text on page
246) was such a machine, and in addition to the hundreds of CDC 160
systems sold as stand-alone machines, a derivative 12 bit architecture
was used for the I/O processors on Cray's first great supercomputer,
the CDC 6600.

Note that Cray's 12 bit machines had 6 basic addressing modes with
variable length instruction words and other features that were far from
the simple elegance of the PDP-8.  Despite its many modes, the CDC 160
architecture lacked the notion of current page addressing, it had no
unconditional jump instruction, and the I/O instructions all blocked
the CPU until I/O complete.  As a result, the PDP-8 is both far more
flexible and it supports much tighter programming styles.

------------------------------

Subject: What is the PDP-8 instruction set?

The PDP-8 word size is 12 bits, and the basic memory is 4K words.  The
minimal CPU contained the following registers:

.PC - the program counter, 12 bits.
.AC - the accumulator, 12 bits.
.L  - the link, 1 bit, commonly prefixed to AC as <L,AC>.

It is worth noting that many operations such as procedure linkage and
indexing, which are usually thought of as involving registers, are done
with memory on the PDP-8 family.

Instruction words are organized as follows:
. _ _ _ _ _ _ _ _ _ _ _ _
.|_|_|_|_|_|_|_|_|_|_|_|_|
.|     | | |             |
.|  op |i|z|    addr     |

.op   - the opcode.
.i    - the indirect bit (0 = direct, 1 = indirect).
.z    - the page bit (0 = page zero, 1 = current page).
.addr - the word in page.

The top 5 bits of the 12 bit program counter give the current page, and
memory addressing is also complicated by the fact that absolute memory
locations 8 through 15 are incremented prior to use when used as indirect
addresses.  These locations are called auto-index registers (despite the
fact that they are in memory); they allow the formulation of very tightly
coded array operations.

The basic instructions are:

.000 - AND - and operand with AC.
.001 - TAD - add operand to <L,AC> (a 13 bit value).
.010 - ISZ - increment operand and skip if result is zero.
.011 - DCA - deposit AC in memory and clear AC.
.100 - JMS - jump to subroutine.
.101 - JMP - jump.
.110 - IOT - input/output transfer.
.111 - OPR - microcoded operations.

The ISZ and other skip instructions conditionally skip the next
instruction in sequence.  The ISZ is commonly used to increment a loop
counter and skip if done, and it is also used as an general increment
instruction, either followed by a no-op or in contexts where it is known
that the result will never be zero.

The JMS instruction stores the return address in relative word zero of
the subroutine, with execution starting with relative word one.
Subroutine return is done with an indirect JMP through the return
address.  Subroutines commonly increment their return addresses to index
through inline parameter lists or to perform conditional skips over
instructions following the call.

The IOT instruction has the following form:
. _ _ _ _ _ _ _ _ _ _ _ _
.|1|1|0|_|_|_|_|_|_|_|_|_|
.|     |           |     |
.|     |   device  | op  |

The IOT instruction specifies one of up to 8 operations on one of 64
devices.  Typically (but not universally), each bit of the op field
evokes an operation, and these can be microcoded in right to left
order.  Prior to the PDP-8/E, there were severe restrictions on the
interpretation of the op field that resulted from the fact that the
operation was delivered as a sequence of IOP pulses, each on a separate
line of the I/O bus.  Each line was typically used to evoke a different
device function, so essentially, the operation 000 was always a no-op
because it evoked no functions, and the code 111 evoked all three
functions in series.

As an example of the use of IOT instructions, consider the console
terminal interface.  On early PDP-8 systems, this was always assumed to
be an ASR 33 teletype, complete with low-speed paper tape reader and
punch.  It was addressed as devices 03 (the keyboard/reader) and 04
(the teleprinter/punch):
. _ _ _ _ _ _ _ _ _ _ _ _
.|1|1|0|_|_|_|_|_|_|_|_|_|
.      |0 0 0 0 1 1|0 0 1  - KSF - keyboard skip if flag
.      |0 0 0 0 1 1|0 1 0  - KCC - keyboard clear flag
.      |0 0 0 0 1 1|1 0 0  - KRS - keyboard read static

The keyboard flag is set by the arrival of a character.  The KCC
instruction clears both the flag and the accumulator.  KRS ors the 8 bit
input data with the low order 8 bits of AC.  The commonly used KRB
instruction is the or of KCC and KRS.  To await one byte of input, use
KSF to poll the flag, then read the byte with KRB.
. _ _ _ _ _ _ _ _ _ _ _ _
.|1|1|0|_|_|_|_|_|_|_|_|_|
.      |0 0 0 1 0 0|0 0 1  - TSF - teleprinter skip if flag
.      |0 0 0 1 0 0|0 1 0  - TCF - teleprinter clear flag
.      |0 0 0 1 0 0|1 0 0  - TPC - teleprinter print static

The teleprinter flag is set by the completion of the TPC operation (as
a result, on startup, many applications output a null in order to get
things going).  TCF clears the flag, and TPC outputs the low order 8
bits of the accumulator.  The commonly used TLS instruction is the or
of TCF and TPC.  To output a character, first use TSF to poll the flag,
then write the character with TLS.

IOT instructions may be used to initiate data break transfers from block
devices such as disk or tape.  The term "data break" was, for years,
DEC's preferred term for cycle-stealing direct-memory-access data
transfers.

Some CPU functions are accessed only by IOT instructions.  For example,
interrupt enable and disable are IOT instructions:
. _ _ _ _ _ _ _ _ _ _ _ _
.|1|1|0|_|_|_|_|_|_|_|_|_|
.      |0 0 0 0 0 0|0 0 1  - ION - interrupts turn on
.      |0 0 0 0 0 0|0 1 0  - IOF - interrupts turn off

An interrupt is requested when any device raised its flag.  The console
master clear switch resets all flags and disables interrupts.  In
effect, an interrupt is a JMS instruction to location zero, with the
side effect of disabling interrupts.  The interrupt service routine
is expected to test the device flags and perform the operations needed
to reset them, and then return using ION immediately before the indirect
return JMP.  The effect of ION is delayed so that interrupts are not
enabled until after the JMP.

The instructions controlling the optional memory management unit are
also IOT instructions.  This unit allows the program to address up to
32K of main memory by adding a 3 bit extension to the memory address.
Two extensions are available, one for instruction fetch and direct
addressing, the other for indirect addressing.

A wide variety of operations are available through the OPR microcoded
instructions:
         _ _ _ _ _ _ _ _ _ _ _ _
Group 1 |1|1|1|0|_|_|_|_|_|_|_|_|
.         1                - CLA - clear AC
.           1              - CLL - clear the L bit
                     1            - CMA - ones complement AC
                       1          - CML - complement L bit
                               1  - IAC - increment <L,AC>
                         1 0 0    - RAR - rotate <L,AC> right
                         0 1 0    - RAL - rotate <L,AC> left
.                 1 0 1    - RTR - rotate <L,AC> right twice
.                 0 1 1    - RTL - rotate <L,AC> left twice

In general, the above operations can be combined by oring the bit
patterns for the desired operations into a single instruction.  If none
of the bits are set, the result is the NOP instruction.  When these
operations are combined, they operate top to bottom in the order shown
above.  The exception to this is that IAC cannot be combined with the
rotate operations on some models, and attempts to combine rotate
operations have different effects from one model to another (for example,
on the PDP-8/E, the rotate code 001 means swap 6 bit bytes in the
accumulator, while previous models took this to mean something like
"shift neither left nor right 2 bits").
         _ _ _ _ _ _ _ _ _ _ _ _
Group 2 |1|1|1|1|_|_|_|_|_|_|_|0|
                   1     0        - SMA - skip on AC < 0  \
                     1   0        - SZA - skip on AC = 0   > or group
                       1 0        - SNL - skip on L /= 0  /
                   0 0 0 1        - SKP - skip unconditionally
                   1     1        - SPA - skip on AC >= 0 \
                     1   1        - SNA - skip on AC /= 0  > and group
                       1 1        - SZL - skip on L = 0   /
                 1                - CLA - clear AC
                           1      - OSR - or switches with AC
                             1    - HLT - halt

The above operations may be combined by oring them together, except that
there are two distinct incompatible groups of skip instructions.  When
combined, SMA, SZA and SNL, skip if one or the other of the indicated
conditions are true (logical or), while SPA, SNA and SZL skip if all of
the indicated conditions are true (logical and).  When combined, these
operate top to bottom in the order shown; thus, the accumulator may be
tested and then cleared.  Setting the halt bit in a skip instruction is
a crude but useful way to set a breakpoint for front-panel debugging.
If none of the bits are set, the result is an alternative form of no-op.

A third group of operate microinstructions (with a 1 in the least
significant bit) deals with the optional extended arithmetic element to
allow such things as hardware multiply and divide, 24 bit shift
operations, and normalize.  These operations involve an additional data
register, MQ or multiplier quotient, and a small step count register.
On the PDP-8/E and successors, MQ and the instructions for loading and
storing it were always present, even when the EAE was absent, and the
EAE was extended to provide a useful variety of 24 bit arithmetic
operations.

------------------------------

Subject: What does PDP-8 assembly language look like?

There are many different assemblers for the PDP-8, but most use a
compatible basic syntax; here is an example:

.START,.CLA CLL../ Clear everything
..TAD.X./ Load X
..AND I.Y./ And with the value pointed to by Y
..DCA.X./ Store in X
..HLT../ Halt

.X,.1 ../ A variable
.Y,.7 ../ A pointer

Note that labels are terminated by a comma, and comments are separated
from the code by a slash.  There are no fixed fields or column
restrictions.  The "CLA CLL" instruction on the first line is an example
of the microcoding of two of the Group 1 operate instructions.  CLA
alone has the code 7200 (octal), while CLL has the code 7100; combining
these as "CLA CLL" produces 7300.  As a general rule, except when memory
reference instructions are involved, the assembler simply ors together
the values of all blank separated fields between the label and comment.
.
Indirection is indicated by the special symbol I in the operand field,
as in the third line of the example.  The typical PDP-8 assembler has no
explicit notation to distinguish between page zero and current page
addresses.  Instead, the assembler is expected to note the page holding
the operand and automatically generate the appropriate mode.  If the
operand is neither in the current page nor page zero, some assemblers
will raise an error, others will automatically generate an indirect
pointer to the off-page operand; this should be avoided because it only
works for directly addressed off-page operands, and only when the memory
management unit is not being used to address a data field other than the
current instruction field.

Note, in the final two lines of the example, that there is no "define
constant" pseudo-operation.  Instead, where a constant is to be
assembled into memory, the constant takes the place of the op-code field.

The PDP-8 has no immediate addressing mode, but most assemblers provide
a notation to allow the programmer to ignore this lack:

..TAD.(3)./ add 3, from memory on the current page.
..TAD.[5]./ add 5, from memory on page zero.
..JMP I.(LAB)./ jump indirect through the address of LAB.

Assemblers that support this automatically fill the end of each page
with constants defined in this way that have been accumulated during the
assembly of that page.  Note that the variants "(3" and "[5" (with no
closing parentheses) are usually allowed but the use of this sloppy form
is discouraged.  Furthermore, the widely used PAL8 assembler interprets
the unlikely operand "(3)+1" as being the same as "(3+1)".

Arithmetic is allowed in operand fields and constant definitions, with
expressions evaluated in strict left-to-right order, as:

..TAD.X+1./ add the contents of the location after X.
..TAD.(X-1)./ add the address of the location before X.

Other operators allowed include and (&), or (!), multiply (^) and divide
(%), as well as a unary sign (+ or -).  Unfortunately, one of the most
widely used assemblers, PAL8, has trouble when unary operators are mixed
with multiplication or division.
.
Generally, only the first 6 characters of identifiers are significant
and numeric constants are evaluated in octal.

Other assembly language features are illustrated below:

./ Comments may stand on lines by themselves
..../ Blank lines are allowed

..*200../ Set the assembly origin to 200 (octal)

.NL0002=.CLA CLL CML RTL./ Define new opcode NL0002.

..NL0002../ Use new opcode (load 0002 in AC)
..JMP..-1./ Jump to the previous instruction

.X1=.10../ Define X1 (an auto-index register address)
.LETA=."A../ Define LETA as 000011000001 (ASCII A)

..TAD I.X1./ Use autoindex register 1

..IAC; RAL./ Multiple instructions on one line

..$../ End of assembly

The assembly file ends with a line containing a $ (dollar sign) not in
a comment field.

The $, * and =  syntax used by most PDP-8 assemblers replaces functions
performed by pseudo-operations on many other assemblers.  In addition,
PAL8, the most widely used PDP-8 assembler supports the following
pseudo-operations:

..DECIMAL../ Interpret numeric constants in base 10
..OCTAL../ Interpret numeric constants in base 8
..EJECT../ Force a page eject in the listing
..XLIST../ Toggle listing
..XLIST.N./ Turn on listing if N=0, off if N=1
..PAGE . ./ Advance location counter to next page
..PAGE .N./ Set location counter start of page N
..FIELD.N./ Assemble into extended memory field N
..TEXT."STR"./ Pack STR into consecutive 6 bit bytes
..ZBLOCK.N./ Allocate N words, initialized to zero
..IFDEF.S <C>./ Assemble C if symbol S is defined
..IFNDEF.S <C>./ Assemble C if symbol S is not defined
..IFZERO.E <C>./ Assemble C if expression E is zero
..IFNZRO.E <C>./ Assemble C if expression E is not zero
..FIXMRI  OP= VAL./ Define OP as memory reference instruction

Conditonally assembled code must be enclosed in angle brackets.  The
enclosed code may extend over multiple lines and, because different
assemblers treat comments within conditionals differently, the closing
bracket should not be in a comment and any brackets in comments should
be balanced.

------------------------------

Subject: What character sets does the PDP-8 support?

From the beginning, PDP-8 software has generally assumed that textual
I/O would be in 7 bit ASCII.  Most early PDP-8 systems used teletypes
as console terminals; as sold by DEC, these were configured for mark
parity, so most older software assumes 7 bit ASCII, upper case only,
with the 8th bit set to 1.  On output, lines are generally terminated
with both CR and LF; on input, CR is typically (but not always) the
line terminator and LF is typically ignored.  In addition, the tab
character (HT) is generally allowed, but software support output of text
containing tabs varies.

One difficulty with much PDP-8 software is that it bypasses the device
handlers provided by the operating system and goes directly to the
device.  This results in very irregular device support, so that, for
example, control-S and control-Q work to start and stop output under
OS/8, but the OS/8 PAL assembler ignores them when reporting errors.

Most of the better engineered PDP-8 software tends to fold upper and
lower case on input, and it ignores the setting of the 8th bit.  Older
PDP-8 software will generally fail when presented with lower case
textual input (this includes essentially all OS/8 products prior to
OS/278 V1).

Internally, PDP-8 programmers are free to use other character sets, but
the "X notation provided by the assembler encourages use of 7 bit ASCII
with the 8th bit set to 1, and the TEXT pseudo-operation encourages the
6 bit character set called "stripped ASCII".  To map from upper-case-only
ASCII to stripped ASCII, each 8 bit character is anded with octal 77 and
then packed 2 characters per word, left to right.  Many programs use a
semi-standard scheme for packing mixed upper and lower case into 6 bit
TEXT form; this uses ^ to flip from upper to lower case or lower to
upper case, % to encode CR-LF pairs, and @ (octal 00) to mark end of
string.  Note that this scheme makes no provision for encoding the %,
^ and @ characters, nor does it allow control characters other than the
CR-LF pair.

The P?S/8 operating system supports a similar 6 bit text file format,
where upper and lower case are folded together, tabs are stored as _
(underline), end-of-line is represented by 00, padded with any
nonzero filler to a word boundary, and end of file is 0000.

Files under the widely used OS/8 system consist of sequences of 256 word
blocks.  When used for text, each block holds 384 bytes, packed 3 bytes
per pair of words as follows:

..aaaaaaaa..ccccaaaaaaaa
..bbbbbbbb..CCCCbbbbbbbb
..ccccCCCC

Control Z is used as an end of file marker.  Because most of the PDP-8
system software was originally developed for paper tape, binary object
code is typically stored in paper-tape image form using the above packing
scheme.

------------------------------

Subject: What different PDP-8 models were made?

The total sales figure for the PDP-8 family is estimated at over 300,000
machines.  Over 7000 of these were sold prior to 1970, and 30,000 were
sold by 1976.  During the PDP-8 production run, a number of models were
made, as listed in the following table.  Of these, the PDP-8/E is generally
considered to be the definitive machine.  If the PDP-8 is considered to
be the Model T of the computer industry, perhaps the PDP-8/E should be
considered to be the industry's Model A.

    MODEL.DATES.SALES   COST.TECHNOLOGY.REMARKS

    PDP-5.63-67. 116..Transistor
    PDP-8.65-69 .1450.$18,500.Transistor
    LINC-8.66-69. 142.$38,500.Transistor
    PDP-8/S.66-70.1024.$10,000.Transistor.Very slow
    PDP-8/I.68-71 .3698.$12,800.TTL
    PDP-8/L.68-71 .3902. $8,500.TTL..Scaled down 8/I
    PDP-12.69-73?.3500?.$27,900.TTL..Followup to LINC-8
    PDP-8/E.70-78.>10K?. $6,500.TTL MSI.Omnibus
    PDP-8/F.72-78?.>10K?.<$5K.TTL MSI Omnibus.Based on 8/E CPU
    PDP-8/M.72-78?.>10K?.<$5K.TTL MSI Omnibus.OEM version of 8/F
    PDP-8/A.75-84?.>10K?. $1,317.TTL LSI Omnibus.New CPU or 8/E CPU
    VT78.78-80.. $7,995.Intersil 6100.Workstation
    DECmate I.80-84...Harris 6120.Workstation
    DECmate II.82-86.. $1,435.Harris 6120.Workstation
    DECmate III.84-90.. $2,695.Harris 6120.Workstation
    DECmate III+85-90...Harris 6120.Workstation

Additional information is available in part two of this FAQ, where all
known models of the PDP-8, along with variants, alternate marketing
names, and other peculiarities are given.

The last years of the PDP-8 family were dominated by the PDP-8 compatible
microprocessor based VT78 and DECmate workstations.  The Intersil 6100,
also known as the CMOS-8 chip, was developed in 1976; DEC also used the
followup Harris 6120 microprocessors in many peripheral controllers for the
PDP-11 and PDP-15 as well as in the DECmate series of systems.  While all
of the earlier PDP-8 systems were open architecture systems, the DECmates
had closed architectures with an integrated console terminals and limited
peripheral options.

The following PDP-8 compatible or semi-compatible machines were made and
sold by others; very little is known about many of these:

.MODEL..DATE.MAKER, NOTES

.TPA..68?.Hungarian, a PDP-8/L clone, ran FOKAL
.Electrotechnica-100I ?.Yugoslavian, a PDP-8/I clone or OEM label.
.Saratov-2.?.Russian, a slow clone, perhaps PDP-8/S
.Voronezh.?.Russian, another PDP-8/? clone
.SPEAR u-LINC 100?.SPEAR, Inc, Waltham Mass (a LINC clone!)
.SPEAR u-LINC 300?.SPEAR, Inc, Waltham Mass (a LINC clone!)
.DCC-112..70.Digital Computer Controls, PDP-8/L clone.
.DCC-112H.71.Digital Computer Controls
.MP-12..74.Fabritek, PDP-8/L clone
.6100 Sampler.76?.Intersil, their IM6100 promotional kit
.Intercept I.7?.Intersil, based on IM6100
.Intercept Jr.7?.Intersil, based on IM6100
.PCM-12..7?.Pacific CyberMetrix, based on Intercept bus
.PCM-12A..7?.Pacific CyberMetrix, fixed to clock at 4MHz
.SBC-8..84-88.CESI, Based on IM6120, SCSI bus
.
------------------------------

Subject: What about the LINC/8 and PDP-12?

Wesley Clark and Charles Molnar, then at Lincoln Labs, built the LINC, or
Laboratory INstrumentation Computer, as a personal laboratory computer,
finishing the first in March 1962.  The machine was developed in response
to the needs of Mary Brazier, a neurophysiologist at MIT who needed better
laboratory tools.  When Lincoln Labs decided that the LINC did not fit
their mission, a group at the the National Institute of Health funded an
experiment to see if the LINC would be a productive tool in the life
sciences.  As a result of this project, 12 LINCs were built and debugged,
each by its eventual user.

Over 24 LINC systems were built by customers before late 1964 when DEC
began selling a commercial version (see Computers and Automation, Nov.
1964, page 43).  By the time DEC introduced the LINC-8, 43 LINC systems
had been installed (see Computers and Automation, Mar. 1966, page 34).
In total, 50 LINC systems were built, 21 by DEC, 29 by customers (see
Digital at Work, page 52).

The LINC was the first 12 bit minicomputer built using DEC hardware.
Like the PDP-5 and other early DEC computers, it was built with system
modules, DEC's first family of logic modules.  Along with the CDC 160,
it paved the way for the PDP-5 and PDP-8.

When compared with the PDP-8, the LINC instruction set was not as well
suited for general purpose computation, but the common peripherals
needed for lab work such as analog-to-digital and digital-to-analog
converters were all bundled into the LINC system.  Users judged it to
be a superb laboratory instrument.

One of the major innovations introduced with the LINC was the LINCtape,
designed by Tom Stockebrand.  These tapes could be carelessly pocketed or
dropped on the floor without fear of data loss, and they allowed random
access to data blocks.  Stockebrand improved on this idea slightly after
he came to DEC, where the improved idea was called DECtape; DECtape was
widely used with all DEC computers made in the late 1960's and early
1970's.

The motives behind the development of LINCtape were the same motives
that led IBM to develop the floppy disk almost a decade later, and in
fact, DECtape survived as a widely used medium until DEC introduced the
RX01 8 inch floppy disk drive around 1975, and even after this, DECtape
was only slowly phased out.

Within a year of the introduction of the PDP-8, DEC released the LINC-8,
a machine that combined a PDP-8 with a LINC in one package.  The
success of the LINC-8 led DEC to re-engineer the machine using TTL
logic in the late 1960's; the new version was originally to be called
the LINC-8/I, but it was sold as the PDP-12.  Both the LINC-8 and the
PDP-12 had impressive consoles, with separate sets of lights and
switches for the LINC and PDP-8 halves.

The success of the LINC-8 also led to the development of a clone, the
SPEAR micro-LINC.  This machine used Motorola MECL integrated circuits
and was available for delivery in (June 1965? this date must be wrong!).

The LINC-8 and PDP-12 could run essentially any PDP-8 or LINC program,
with the exception of the few programs that relied on the primitive
interrupt structure of the original LINC architecture; on the LINC-8,
all interrupts were handled by the PDP-8 side of the hardware.  Because
the LINC-8 and PDP-12 had instructions for switching between modes, a
new body of software was developed that required both modes.

One feature of LINC and LINC-8 software is the common use of the graphic
display for input-output.  These machines were some of the first to
include such a display as a standard component, and many programs used
the knobs on the analog to digital converter to move a cursor on the
display in the way we now use a mouse.

Various versions of LAP, the Linc Assembly Program, were the dominant
assemblers used on the LINC.  WISAL (WISconson Assembly Language) or
LAP6-W was the version of this assembler that survived to run on the
PDP-12.  Curiously, this includes a PDP-8 assembler written in LINC code.

LAP6-DIAL (Display Interactive Assembly Language) evolved from this on
the PDP-12 to became the dominant operating system for the PDP-12.  The
8K version of this is DIAL MS (Mass Storage), even if it has only two
LINCtape drives.  These were eventually displaced by the OS/8 variant
known as OS/12.

------------------------------

Subject: Where can I get a PDP-8 today?

The IM6100 chip is still available (Electronic Expediters, (818)781-1910
(in North America) listed them at US$23.50 each as of 10/1994), and CESI
may still make their clone, for a high price, but you can't buy a new
DEC PDP-8.  There are quite a few PDP-8 machines to be found in odd
places on the used equipment market.  They were widely incorporated into
products such as computer controlled machine tools, X-ray diffraction
machines, and other industrial and lab equipment.  Many of them were
sold under the EduSystem marketing program to public schools and
universities, and others were used to control laboratory instrumentation.
After about 1976, Reuters bought as many as 10,000 OMNIBUS based
machines per year, with perhaps 2000 per year going to other customers.

If you can't get real hardware, you can get emulators.  Over the years,
many PDP-8 emulators have been written; the best of these are
indistinguishable from the real machine from a software prespective,
and on a modern high-speed RISC platform, these frequently outperform
the hardware they are emulating.  An emulator is available from DECUS,
catalog number RB0128; This and other emulators are available from:

  ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-8/emulators
  ftp://ftp.cs.uiowa.edu/public/jones/pdp8/emulator.txt.Z

An emulator for the Apple Mac is available by E-mail from Bernhard Baehr
(bb@informatik.uni-hannover.de).

Finally, you can always build your own.  The textbook "The Art of
Digital Design," second edition, by Franklin Prosser and David Winkel
(Prentice-Hall, 1987, ISBN 0-13-046780-4) uses the design of a PDP-8 as
a running example.  Many students who have used this book were required
to build working PDP-8 systems as lab projects.  "Modern VLSI Design - A
system approch" by Wayne Wolf (1994 Prentice-Hall) use the PDP-8 as a
data-path example.

------------------------------

Subject: Where can I get PDP-8 documentation?

The key documents published by DEC describing each model of the PDP-8
are all out of print, and DEC was in the habit of printing much of
their documentation on newsprint with paperback bindings, which is to
say, surviving copies tend to be yellow and brittle.  DEC distributed
huge numbers of catalogs and programming handbooks in this inexpensive
paperback format, and these circulate widely on the second-hand market.
When research laboratories and electronics shops are being cleaned out,
it is still common to find a few dusty, yellowed copies of these books
being thrown out.

Douglas Jones has made a small number of bound photocopies of DEC's
1973 introduction to programming, perhaps the definitive introduction
to the PDP-8, and the other early DEC handbooks need similar treatment
before they all crumble.

Some PDP-8 refernce material has been transcribed into Hypertext format
and is available over WWW from:

.http://www.cs.uiowa.edu/~jones/pdp8/index.html

Maintenance manuals are harder to find, but more valuable.  If you need
one, you usually need to find someone willing to photocopy one of the
few surviving copies.  DEC has been friendly to collectors, granting
fairly broad letters of permission to reprint obsolete documentation,
and the network makes if fairly easy to find someone who has the
documentation you need and can get copies.  The most difficult to copy
material is the large prints, many of which would be quite useful if
photoreduced, but this is expensive.

------------------------------

Subject: What operating systems were written for the PDP-8?

A punched paper-tape library of stand-alone programs was commonly used
with the smallest (diskless and tapeless) configurations from the
beginning up through the mid 1970's.  This included a paper-tape based
text editor, the PAL III and MACRO-8 assembler, and a FORTRAN compiler,
as well as a library of support routines.  Many paper tapes from this
library survive to the present at various sites!  The minimum
configuration expected by these tapes is a CPU with 4K memory and a
teletype ASR 33 with paper tape reader and punch.  Note that much of this
paper-tape-based software is based on memory-use and I/O conventions that
are incompatible with later disk-based systems.

The DECtape Library System was a DECtape oriented save and restore system
that was available from the start.  The resident portion of this system
occupies only 17 words of memory (7600-7625 octal), and it allowed saving
and restoring absolute core images as named files on a reel of DECtape.
Initially, program development was still done with paper tape, and only
executable memory images were stored on DECtape, but eventually, a limited
DECtape-based text editor was introduced, along with a DECtape based
assembler.

The 4K Disk Monitor System provided slightly better facilities.  This
supported on-line program development and it worked with any device that
supported 129 word blocks (DECtape, the DF32 disk, or the RF08 disk).
It was quite slow, but it also used very little of the available memory.

MS/8 or the R-L Monitor System, was developed starting in 1966 and
submitted to DECUS in 1970.  This was a disk oriented system, faster than
the above, with tricks to make it run quickly on DECtape based systems.

POLY BASIC was a BASIC only system submitted to DECUS and later sold by
DEC as part of its EduSystem marketing program.  EduSystem 25 Basic
is available from:

.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8/Langs/Edu25Basic

P?S/8 was developed starting in 1971 from an MS/8 foundation.  It runs
on minimal PDP-8 configurations, supports somewhat device independant
I/O and requires a random-access device for the file system (DECtape is
random-access!).  P?S/8 runs compatibly on most PDP-8 machines including
DECmates, excepting only the PDP-8/S and PDP-5.  P?S/8 is still being
developed!

Richard F. Larry developed a system called the Fully Upward Compatible
Keyboard Monitor; and between a Wednesday and the following Friday, a
prototype was up and running from DECtape.  The original intention of
this project was to build a programming environment for the PDP-8 that
looked like TOPS-10 on the PDP-10.  A year later, this was released as
Programming System/8 (or PS/8), and then renamed OS/8 in 1971 because
Eli Glaser (a salesman from Long Island) said he could sell more systems
with an operating system than with a programming system, and because, by
renaming the system, DEC could increase the price despite Nixon's
wage-price freeze.

OS/8, developed in parallel with P?S/8, became the main PDP-8 programming
environment sold by DEC.  The minimum configuration required was 8K words
and a random-access device to hold the system.  For some devices, OS/8
requires 12K.  There are a large number of OS/8 versions that are not
quite portable across various subsets of the PDP-8 family.  OS/8 V3D was
renamed OS/78 (to match the VT78), and by the time OS/78 V3 was released,
support for Omnibus machines was no longer important.  OS/78 V4 was
developed for the DECmate I, and the name OS/278 used for the versions
released with later DECmate machines.  These have unnecessary
incompatabilities with earlier versions of OS/8.  OS/278 and related
material is available from DECUS as catalog item 800941, or from:

.ftp://ftp.telebit.com/pub/pdp8/os278
.ftp://ftp.update.uu.se/pub/pdp8
.ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-8/os8

Some OS/8 documentation is available on line from:

.ftp://ftp.dbit.com/pub/pdp8/doc

OS8 (no slash) may still be viable.  It requires 8K of main memory, an
extended arithmetic unit, and DECtape hardware.  Unlike most PDP-8
operating systems, it uses a directory structure on DECtape compatible
with that used on the PDP-10.

TSS/8 was developed in 1968 as a timesharing system.  It required a
minimum of 12K words of memory and a swapping device.  It was the
standard operating system on the EduSystem 50 which was sold to many
small colleges and large public school systems.  Each user gets a
virtual 4K PDP-8; many of the utilities users ran on these virtual
machines were only slightly modified versions of utilities from the
Disk Monitor System or paper-tape environments.

Other timesharing systems developed for the PDP-8 include MULTI-8, ETOS,
MULTOS, and OMNI-8; some of these required nonstandard memory management
hardware.  By the mid 1970's, some of these were true virtual machine
operating systems in the same spirit as IBM's VM-370; they typically
supported some version of OS/8 running on a 32K virtual PDP-8 assigned
to each user.  Some could support different user operating systems on
each virtual machine, others supported addressing of more than 4K for
data, but limited code to field zero of a process's virtual memory.
The source for MULTOS is available from:

.ftp://ftp.update.uu.se/pub/pdp8/multos8

CAPS-8 was a cassette based operating system supporting PAL and BASIC.
There are OS/8 utilities to manipulate CAPS-8 cassettes, and the file
format on cassette is compatible with a PDP-11 based system called
CAPS-11.

RTS/8 was a real-time system developed by DEC, developed from an earlier
system, SRT8, dating back to at least 1974.  Curiously, even the last
versions of RTS/8 continued to support paper-tape and DECtape.  Source
code for most of the versions of RTS and SRT are available from:

.ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-8/rts8

WPS was DEC's word processing system, developed for the 8/E with a VT50
terminal with special WPS keycaps replacing the standard keycaps, and
widely used on the 1980's vintage machines.  It was heavily promoted on
the VT-78, and when the DECmates came out, DEC began to suppress knowledge
that DECmates could run anything else.  WPS-11 was a curious distributed
system using a PDP-11 as a file server for a cluster of VT-78 WPS systems.
DECmate/WPS Version 2.3 is available from DECUS for the DECmate II and
DECmate III under the catalog entry DM0114.

COS-310, DEC's commercial operating system for the PDP-8, supported the
DIBOL language.  COS-310 was a derivative of MS/8 and OS/8, but with a
new text file format.  The file system is almost the same as OS/8, but
dates are recorded differently, and a few applications can even run under
both COS and OS/8.  COS was the last operating system other than WPS
promoted by DEC for the DECmates.

------------------------------

Subject: What programming languages are supported on the PDP-8

The PAL family of assembly languages, particularly PAL III and PAL8 are
as close to a standard assembly language as can be found for the PDP-8.
These produce absolute object code and there are versions of PAL for
minimally configured machines, although these have severe symbol table
limitations.  Cross assemblers that are somewhat compatable with PAL
can be obtained from:

.ftp://ftp.cs.uiowa.edu/public/jones/pdp8/pal.c.Z
.ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-8/emulators/gray

MACRO-8 was DEC's first macro assembly language for the PDP-8, but it
was rarely used outside the paper-tape environment.  MACREL and SABR are
assembly languages that produce relocatable output.  SABR is the final
pass for the ALICS II FORTRAN compiler (developed by ICS), and MACREL
was developed in (unfulfilled) anticipation of similar use.  MACREL was
heavily used by the DECmate group at DEC.  MACREL is available from

.ftp://ftp.update.uu.se/pub/pdp8/os8

There was also RALF, the relocatable assembler supporting RTPS FORTRAN,
and FLAP, an absolute assembler derived from RALF.  Both SABR and
RALF/FALP are assemblers that handle their intended applications but
have quirky and incompatible syntax.

A subset of FORTRAN was supported on both the PDP-5 and the original
PDP-8.  Surviving documentation describes a DEC compiler from 1964 and
a compiler written by Information Control Systems from 1968.  The
latter, ALICS II FORTRAN, was originally a paper tape based compiler,
but it forms the basis of the OS/8 8K FORTRAN compiler, and was also
adapted to the Disk Monitor System (the latter version had overlay
support that was never carried forward into more modern systems).

RTPS FORTRAN required 8K and a floating point processor; it had real-time
extensions and was a full implementation of FORTRAN IV (also known as
ANSI FORTRAN 66).  OS/8 F4 is RTPS FORTRAN stripped of the requirement
for hardware floating point (if the hardware is missing, it uses
software emulation).  A version of FORTRAN is available from

.ftp://ftp.update.uu.se/pub/pdp8/os8

FOCAL, an interpretive language comparable to BASIC, was available on
all models of the family, including the PDP-5 and PDP-8/S.  Versions of
FOCAL run under OS/8, P?S/8 and other systems, and there were many special
purpose overlays for FOCAL developed by DEC and by various users.  DEC's
later FOCAL releases for the PDP-8 included code to deliberately introduce
subtle bugs when run on a DCC 112 computer!  Various versions of FOCAL
are available from:

.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8/Langs/Focal

Many versions of BASIC were also available, from DEC and other sources.
DEC BASIC was widely used on PDP-8 systems sold under the EduSystem
marketing program.  A paper-tape version was available that ran in 4K
and was compatible with disk based systems, versions were developed for
OS/8 and TSS/8, an 8K stand-alone time-sharing version was available,
and there were others.  EduSystem 25 Basic is available from:

.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8/Langs/Edu25Basic

DIBOL was DEC's attempt at competing with COBOL in the commercial arena.
It was originally implemented under MS/8 but most versions were sold to
run under the COS operating system.

Algol was available from a fairly early date.  One version is available
from:

.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8/Langs/Algol

At least two Pascal compilers were developed for the PDP-8.  One was a
Pascal-S interpreter, written in assembler, the other was a Pascal-P
compiler with a P-code interpreter written in assembler.

A LISP interpreters was written for the PDP-8; the original version
ran in 4K (originally written in Germany?); a disassembled and commented
version of this was the basis of expanded versions that eventually
could utilize up to 16K.  One version of LISP is available from:

.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8/Langs/Lisp

A Pascal S interpreter, requiring a 28K PDP-8/E configuration, is available
from:

.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8/Langs/Pascal

POLY SNOBOL was a version of SNOBOL that was somewhere between
Griswold's definitions of SNOBOL 3 and SNOBOL 4.

TECO, the text editor, is available, and is also a general purpose
language, and someone is working on a PDP-8 C.  The story of TECO on the
PDP-8 is convoluted.  Russ Ham implemented TECO under his OS8 (without
a slash) system.  This version of TECO was pirated by the Oregon Museum
of Science and Industry (OMSI), where the system was ported to PS/8.
Richard Lary and Stan Rabinowitz made it more compatible with other
versions of TECO, and the result of this work is the version distributed
by DECUS (catalog number 110450 is the manual).  RT-11 TECO for the
PDP-11 is a port of this code.

DECUS also lists the PAGE8 language (catalog numbers 800936), the VISTA
editor (catalog number 800938), and the ICE text editor (catalog number
800939).

------------------------------

Subject: Where can I get PDP-8 software?

DEC is still making computers, but they've largely forgotten about the
PDP-8.  The main DEC WWW server is

.http://www.digital.com/

DECUS, the DEC User Society, is still alive and well, and their submission
form still lists PAL8 and FOCAL as languages in which they accept
submissions!  The DECUS library catalog is available on-line at
decus.org; www access is through gopher.decus.org or

.http://www.decus.org/

To quote the README file from the DECUS on-line catalog, "Items from
older DECUS Library catalogs are still also available (provided their
media can still be read), but machine readable catalog information is
not available for these."  Direct questions by E-mail to
INFORMATION@DECUS.ORG.

The following anonymous FTP sites contain publically accessable archives
of PDP-8 software and other information:

.ftp://ftp.telebit.com/pub/pdp8
.ftp://ftp.update.uu.se/pub/pdp8
.ftp://nickel.ucs.indiana.edu/pub/DEC/PDP8
.ftp://sunsite.unc.edu/pub/academic/computer-science/history/pdp-8

The latter archive also maintains an archive of traffic in alt.sys.pdp8
in the directory ...pdp8/usenet and an archive of traffic in the
pdp8-lovers mailing list in .../pdp8/pdp8-lovers.

The archive at Indiana contains source code for many PDP-8 compilers and
interpreters, as well as common utilities and games.

------------------------------

Subject: Where can I get additional information?

The file WHAT-IS-A-PDP8, by Charles Lasner contains considerable
additional information; this file is available by ftp from:

.ftp://ftp.telebit.com/pub/pdp8/WHAT-IS-A-PDP8

This file gives details of every PDP-8 model including the small quirks
and incompatabilities that (to be generous) allow software to determine
which model it is running on.  These quirks also make it all too easy
for careless programmers to write almost portable software with very
obscure bugs.

The mailing list pdp8-lovers@ai.mit.edu reaches a number of PDP-8 owners
and users, not all of whom have USENET feeds.  The USENET newsgroup
alt.sys.pdp8 needs to be gatewayed to this mailing list.

Many "archival" books have included fairly complete descriptions of the
PDP-8; among them, "Computer Architecture, Readings and Examples" by
Gordon Bell and Allen Newell is among the most accurate and complete
(but difficult to read).

------------------------------

Subject: What use is a PDP-8 today?

What use is a Model T today?  Collectors of both come in the same basic
classes.  First, there are antiquarians who keep an old one in the
garage, polished and restored to new condition but hardly ever used.
Once a year, they warm it up and use it, just to prove that it still
works, but they don't make much practical use of it.

PDP-8 systems maintained by antiquarians are frequently in beautiful
shape.  Antiquarians worry about dust, chipped paint, and missing
switches, and they establish newsgroups and mailing lists to help them
locate parts and the advice needed to fix their machines.

In the second class are those who find old machines and soup them up,
replacing major parts to make a hotrod that only looks like the original
from the outside, or keeping the old mechanism and putting it to uses
that were never intended.  Some PDP-8 owners, for example, have built
PDP-8 systems with modern SCSI disk interfaces!  There is serious
interest in some quarters in constructing an omnibus board that would
support an IDE disk of the variety that was mass-produced for the
IBM PC/AT.

Last, there are the old folks who still use their old machines for their
intended purposes long after any sane economic analysis would recommend
such use.  If it ain't broke, don't fix it, and if it can be fixed,
why bother replacing it?  Both Model T Fords and the classic PDP-8
machines are simple enough that end users can maintain and repair them
indefinitely.  All you need to keep a vintage -8 running are a stock
of inexpensive silicon diodes and a stock of 2N3639B or better,
2N3640 transistors.

Unlike most modern personal computers, PDP-8 systems were routinely sold
with complete maintenance manuals; these included schematic diagrams,
explanations of not only how to use the devices, but how they are built,
and suggestions to those considering building their own peripherals.
Compared with many so-called "open systems" of today, the PDP-8 was far
better documented and far more open.

Preservation of the PDP-8 has proven to be of immense practical value
in defending against the rising tide of patents in the area of
interactive graphics.  For example, when Magnavox sued Nintendo
for half a billion dollars, a documented copy of a ping pong game,
written on a LINC back in the early 1960's, was crucial to the proof
that computer games predated the Magnavox patent by over 5 years.
The fact that this can be run today on a surviving LINC-8 makes
demonstrating this proof far easier than if the only surviving relic
was a dusty listing.

Finally, the PDP-8 is such a minimal machine that it is an excellent
introduction to how computers really work.  Over the years, many students
have built complete working PDP-8 systems from scratch as lab projects,
and the I/O environment on a PDP-8 is simple enough that it is a very
appropriate environment for learning operating system programming
techniques.

------------------------------

Subject: Who's Who?

You can't beat the book Digital at Work (Digital Press, 1992) for short
writeups on the people inside DEC who made the PDP-8!

C. Gordon Bell is generally credited with the original design of the
PDP-8.  He was also involved with recommending what became the PDP-11
when that design was competing with the design that probably became the
NOVA, and as vice president of research, he oversaw the development of
the DEC VAX family.

Alan Kotok worked with Bell in working up the original specifications
of the PDP-8.

Edson DeCastro was a key man in the design of the PDP-5 through the
PDP-8/L, then founded Data General to build the Nova.

Ben Gurley designed most of the big DEC machines, starting with the
PDP-1.  The actual design work on the -8, however, was done by Ed
deCastro, who later founded Data General to build the Nova.

Ken Olson ran DEC from the beginning.

Ed Yourdon, who later became well known as a programming methodology
guru, helped hack up the PAL III assembler for the -8 from PAL II.

Richard Merrill invented FOCAL and wrote the original (1968) and classic
FOCAL-69 interpreters for the PDP-8.  He also did early translations of
the interpreter to PDP-7/PDP-9 code and perhaps the earliest PDP-11
version.  In addition, he wrote the EDIT-8 paper-tape based text editor
based on the FOCAL built-in text editor.

Richard F. Lary developed OS/8, with help from Ed Friedman and another
programmer named Paul, under the management of Chuck Conley.

Charles Lasner developed P?S/8, and he is widely known as a leader in
the movement to preserve these historic machines.  He created the
alt.sys.pdp8 newsgroup.

Wesley Clark developed the LINC while working at Lincoln Labs; this was
the first 12 bit minicomputer built with DEC parts.

Mary Allen Wilkes Clark developed the early LAP programs for the LINC.

Douglas W. Jones wrote this FAQ, but prior to the summer of 1992, he'd
never used a PDP-8.  He has also written a report on how to photocopy
and archivally bind ailing paperback books such as DEC's handouts, a
PAL-like cross assembler in C, and a UNIX-based PDP-8 emulator.

------------------------------

End of PDP-8 Frequently Asked Questions (posted every other month)
******************************************************************
