XPost: linux.debian.bugs.dist 
 From: bdrung@debian.org 
  
 Package: src:linux 
 Version: 6.12.48-1 
 Severity: normal 
 X-Debbugs-Cc: bdrung@debian.org 
  
 Hi, 
  
 I have three Raspberry Pi Zero W running trixie headless. All stopped 
 working after upgrading to linux-image-6.12.48+deb13-rpi. Since they are 
 headless, I removed the SD card and checked the logs on there. The last 
 logs where from upgrading to linux-image-6.12.48+deb13-rpi and the 
 shutdown (from the reboot). There were no logs from the 
 linux-image-6.12.48+deb13-rpi boot. So it probably failed to boot in the 
 kernel or initrd (before switching to the root fs). 
  
 I changed the kernel+initrd in /boot/firmware/config.txt from 
 6.12.48+deb13-rpi to 6.12.43+deb13-rpi and then the system worked again. 
 I checked that content of the initrd looks okay (only the kernel module 
 versions differ). 
  
 -- Package-specific info: 
 ** Kernel log: boot messages should be attached 
  
 ** Model information 
 Hardware€€€€€€€€€€€€€€€€: BCM2835 
 Revision€€€€€€€€€€€€€€€€: 0000 
 Device Tree model: Raspberry Pi Zero W Rev 1.1 
  
 ** Configuration for modprobe: 
 blacklist arkfb 
 blacklist aty128fb 
 blacklist atyfb 
 blacklist radeonfb 
 blacklist cirrusfb 
 blacklist cyber2000fb 
 blacklist kyrofb 
 blacklist matroxfb_base 
 blacklist mb862xxfb 
 blacklist neofb 
 blacklist pm2fb 
 blacklist pm3fb 
 blacklist s3fb 
 blacklist savagefb 
 blacklist sisfb 
 blacklist tdfxfb 
 blacklist tridentfb 
 blacklist vt8623fb 
 options snd_pcsp index=-2 
 options cx88_alsa index=-2 
 options snd_atiixp_modem index=-2 
 options snd_intel8x0m index=-2 
 options snd_via82xx_modem index=-2 
 options bonding max_bonds=0 
 options dummy numdummies=0 
 options ifb numifbs=0 
 options dma dmachans=0x7ff5 
 options bcm2708 boardrev=0x9000c1 
 options bcm2708 serial=0x8bb1238 
 options bcm2708 uart_clock=48000000 
 options bcm2708 disk_led_gpio=47 
 options smsc95xx macaddr=B8:27:EB:BB:12:38 
 options vc_mem mem_base=0x1ec00000 
 options vc_mem mem_size=0x20000000 
 options fsck repair=yes 
 options net ifnames=0 
  
 ** Network interface configuration: 
 *** /etc/network/interfaces: 
 source-directory /etc/network/interfaces.d 
  
 auto lo 
 iface lo inet loopback 
  
 allow-hotplug eth0 
 iface eth0 inet dhcp 
  
 allow-hotplug wlan0 
 iface wlan0 inet dhcp 
 wpa-ssid Skynet 
 wpa-psk ********************** 
  
 ** PCI devices: 
 not available 
  
 ** USB devices: 
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 
  
  
 -- System Information: 
 Debian Release: 13.1 
 €€ APT prefers stable-updates 
 €€ APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 
 'stable') 
 Architecture: armel (armv6l) 
  
 Kernel: Linux 6.12.43+deb13-rpi (UP) 
 Kernel taint flags: TAINT_CRAP 
 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE 
 not set 
 Shell: /bin/sh linked to /usr/bin/dash 
 Init: systemd (via /run/systemd/system) 
 LSM: AppArmor: enabled 
  
 Versions of packages linux-image-6.12.48+deb13-rpi depends on: 
 ii€€ initramfs-tools [linux-initramfs-tool]€€ 0.148.3 
 ii€€ kmod€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€ 
 €€€€€€€€€€€€€€ 34.2-2 
 ii€€ linux-base€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€ 4. 
 12 
  
 Versions of packages linux-image-6.12.48+deb13-rpi recommends: 
 ii€€ apparmor€€ 4.1.0-1 
  
 Versions of packages linux-image-6.12.48+deb13-rpi suggests: 
 pn€€ debian-kernel-handbook€€  
 ii€€ firmware-linux-free€€€€€€€€ 20241210-2 
 pn€€ linux-doc-6.12€€€€€€€€€€€€€€€€€€  
  
 Versions of packages linux-image-6.12.48+deb13-rpi is related to: 
 pn€€ firmware-amd-graphics€€€€€€€€€€  
 pn€€ firmware-atheros€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-bnx2€€€€€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-bnx2x€€€€€€€€€€€€€€€€€€€€€€€€  
 ii€€ firmware-brcm80211€€€€€€€€€€€€€€€€ 20250410-2 
 pn€€ firmware-cavium€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-cirrus€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-intel-graphics€€€€€€  
 pn€€ firmware-intel-misc€€€€€€€€€€€€€€  
 pn€€ firmware-intel-sound€€€€€€€€€€€€  
 pn€€ firmware-ipw2x00€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-ivtv€€€€€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-iwlwifi€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-libertas€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-marvell-prestera€€  
 pn€€ firmware-mediatek€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-misc-nonfree€€€€€€€€€€  
 pn€€ firmware-myricom€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-netronome€€€€€€€€€€€€€€€€  
 pn€€ firmware-netxen€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-nvidia-graphics€€€€  
 pn€€ firmware-qcom-soc€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-qlogic€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-realtek€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-samsung€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-siano€€€€€€€€€€€€€€€€€€€€€€€€  
 pn€€ firmware-ti-connectivity€€€€  
 pn€€ xen-hypervisor€€€€€€€€€€€€€€€€€€€€€€€€  
  
 -- no debconf information 
  
 -- 
 Benjamin Drung 
 Debian & Ubuntu Developer 
  
 --- SoupGate-Win32 v1.05 
  * Origin: you cannot sedate... all the things you hate (1:229/2)