XPost: linux.debian.bugs.dist 
 From: jeanmarc.lacroix@free.fr 
  
 Package:   linux-image-6.12.48+deb13-arm64 
 Version:   6.12.48-1 
 Severity:  grave 
  
 Dear maintainers, 
  
 I am trying to use Orangepi5B plus with ... 
  
 - 32 Go RAM 
 - 1 TB Crucial Gen 4 NVMe 2280 M.2 SSD 
 - Wifi & BT Pcie Wireless module R6 
 - 256 GB Emmc 
  
 Image is generated from Johan Gunnarsson and is available here : 
  
 https://sd-card-images.johang.se/boards/orangepi_5_plus.html 
  
  
 -------------------------- boot log file --------------------- 
       1 DDR 9fffbe1e78 cym 24/02/04-10:09:20,fwver: v1.16 
       2 LPDDR4X, 2112MHz 
       3 channel[0] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 
 Size=8192MB 
       4 channel[1] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 
 Size=8192MB 
       5 channel[2] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 
 Size=8192MB 
       6 channel[3] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 
 Size=8192MB 
       7 Manufacturer ID:0xff 
       8 CH0 RX Vref:27.5%, TX Vref:22.8%,22.8% 
       9 CH1 RX Vref:28.5%, TX Vref:20.8%,21.8% 
      10 CH2 RX Vref:31.0%, TX Vref:19.8%,20.8% 
      11 CH3 RX Vref:30.1%, TX Vref:22.8%,22.8% 
      12 change to F1: 528MHz 
      13 change to F2: 1068MHz 
      14 change to F3: 1560MHz 
      15 change to F0: 2112MHz 
      16 out 
      17 U-Boot SPL board init 
      18 U-Boot SPL 2017.09-orangepi (Aug 30 2024 - 22:09:16) 
      19 Trying to boot from MMC1 
      20 Trying fit image at 0x4000 sector 
      21 ## Verified-boot: 0 
      22 ## Checking atf-1 0x00040000 ... sha256(7612223b82...) + OK 
      23 ## Checking u-boot 0x00a00000 ... sha256(5f47279329...) + OK 
      24 ## Checking fdt-1 0x00ad31d0 ... sha256(da21eba208...) + OK 
      25 ## Checking atf-2 0x000f0000 ... sha256(b2af21b504...) + OK 
      26 ## Checking atf-3 0xff100000 ... sha256(70505bb764...) + OK 
      27 Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000) 
      28 Total: 764.208 ms 
  
      29 INFO:    Preloader serial: 2 
      30 NOTICE:  BL31: v2.3():v2.3-868-g040d2de11:derrick.huang, fwver: 
 v1.48 
      31 NOTICE:  BL31: Built : 15:02:44, Dec 19 2024 
      32 INFO:    spec: 0x1 
      33 INFO:    code: 0x88 
      34 INFO:    ext 32k is valid 
      35 INFO:    ddr: stride-en 4CH 
      36 INFO:    GICv3 without legacy support detected. 
      37 INFO:    ARM GICv3 driver initialized in EL3 
      38 INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 
      39 INFO:    l3 cache partition cfg-0 
      40 INFO:    system boots from cpu-hwid-0 
      41 INFO:    bypass memory repair 
      42 INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 
      43 INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz 
      44 INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz 
      45 INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz 
      46 INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz 
      47 INFO:    BL31: Initialising Exception Handling Framework 
      48 INFO:    BL31: Initializing runtime services 
      49 WARNING: No OPTEE provided by BL2 boot loader, Booting device 
 without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK 
      50 ERROR:   Error initializing runtime service opteed_fast 
      51 INFO:    BL31: Preparing for EL3 exit to normal world 
      52 INFO:    Entry point address = 0xa00000 
      53 INFO:    SPSR = 0x3c9 
  
  
      54 U-Boot 2025.07johang-dirty (Oct 01 2025 - 02:16:01 +0000) 
  
      55 Model: Xunlong Orange Pi 5 
      56 SoC:   RK3588 
      57 DRAM:  32 GiB (total 31.7 GiB) 
      58 Core:  329 devices, 33 uclasses, devicetree: separate 
      59 MMC:   mmc@fe2c0000: 0 
      60 Loading Environment from nowhere... OK 
      61 In:    serial@feb50000 
      62 Out:   serial@feb50000 
      63 Err:   serial@feb50000 
      64 Model: Xunlong Orange Pi 5 
      65 SoC:   RK3588 
      66 Net:   eth0: ethernet@fe1c0000 
      67 Hit any key to stop autoboot:  2     1     0 
      68 Scanning for bootflows in all bootdevs 
      69 Seq  Method       State   Uclass    Part  Name 
     Filename 
      70 ---  -----------  ------  --------  ---- 
 ------------------------  ---------------- 
      71 Scanning global bootmeth 'efi_mgr': 
      72 Cannot persist EFI variables without system partition 
      73   0  efi_mgr      ready   (none)       0   
      74 ** Booting bootflow '' with efi_mgr 
      75 Loading Boot0000 'mmc 0' failed 
      76 EFI boot manager: Cannot load any image 
      77 Boot failed (err=-14) 
      78 Scanning bootdev 'mmc@fe2c0000.bootdev': 
      79 ** File not found /boot/boot.bmp ** 
      80   1  script       ready   mmc          2 
 mmc@fe2c0000.bootdev.part /boot/boot.scr 
      81 ** Booting bootflow 'mmc@fe2c0000.bootdev.part_2' with script 
      82 37527488 bytes read in 3074 ms (11.6 MiB/s) 
      83 20734800 bytes read in 1756 ms (11.3 MiB/s) 
      84 76642 bytes read in 23 ms (3.2 MiB/s) 
      85 ## Flattened Device Tree blob at 12000000 
      86    Booting using the fdt blob at 0x12000000 
      87 Working FDT set to 12000000 
      88    Loading Ramdisk to ebaec000, end eceb2350 ... OK 
      89    Loading Device Tree to 00000000ebad6000, end 00000000ebaebb61 
 ... OK 
      90 Working FDT set to ebad6000 
  
      91 Starting kernel ... 
  
      92 [    0.000000] Booting Linux on physical CPU 0x0000000000 
 [0x412fd050] 
      93 [    0.000000] Linux version 6.12.48+deb13-arm64 
 (debian-kernel@lists.debian.org) (aarch64-linux-gnu-gcc-14 (Debian 
 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP Debian 
 6.12.48-1 (2025-09-20) 
      94 [    0.000000] KASLR enabled 
      95 [    0.000000] Machine model: Xunlong Orange Pi 5 
      96 [    0.000000] efi: UEFI not found. 
      97 [    0.000000] OF: reserved mem: 
 0x000000000010f000..0x000000000010f0ff (0 KiB) nomap non-reusable 
 shmem@10f000 
      98 [    0.000000] NUMA: Faking a node at [mem 
 0x0000000000200000-0x00000007ffffffff] 
      99 [    0.000000] NODE_DATA(0) allocated [mem 0x7fbff6b00-0x7fbffa23f] 
     100 [    0.000000] Zone ranges: 
     101 [    0.000000]   DMA      [mem 
 0x0000000000200000-0x00000000ffffffff] 
  
 [continued in next message] 
  
 --- SoupGate-Win32 v1.05 
  * Origin: you cannot sedate... all the things you hate (1:229/2)