home  bbs  files  messages ]

      ZZLI4424             linux.debian.kernel             1332 messages      

[ previous | next | reply ]

[ list messages | list forums ]

  Msg # 1102 of 1332 on ZZLI4424, Thursday 8-13-25, 7:03  
  From: PHIL NIGHTOWL  
  To: ALL  
  Subj: Bug#1109666: Fails to boot on Marvell Ar  
 XPost: linux.debian.bugs.dist 
 From: phil.nightowl@gmail.com 
  
 Here are the relevant portions of some boot transcripts as promised. I 
 apologise for the delay. 
  
 Several logs are attached. System behaviour during the attempts was as 
 follows: 
  
 boot1.log - despite the errors, the system comes up, displaying a login 
             prompt; however, after entering the username, the system 
             freezes(the expected password prompt is not shown) 
  
 boot2part[12].log - errors very similar to the first attempt (at first 
                     glance); however, after entering the username, different 
                     error messages appear (instead of a password prompt), 
                     this time indicating much more serious problems, even 
                     suggesting a filesystem corruption (which fortunately 
                     did not happen here, as the system was able to start up 
                     just fine after a reboot with 6.6.13) 
  
 boot3.log - without any changes that I'd be aware of, the system started 
             without any error messages whatsoever; however, after entering 
             the login name, different errors appeared instead of a password 
             prompt 
  
 The first version I found failing was 6.7.12-1~bpo12, so I think the issue 
 was 
 caused sometime between those two (6.6.13 and 6.7.12-1~bpo12). 
  
 Best regards, 
  
 Phil 
  
 Starting kernel ... 
  
  
 [    0.000000] Booting Linux on physical CPU 0x0 
 [    0.000000] Linux version 6.12.35+deb12-armmp (debian-kernel@ 
 ists.debian.org) (arm-linux-gnueabihf-gcc-12 (Debian 12.2.0-14+deb12u1) 
 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.12.35- 
 1~bpo12+1 
 (2025-07 
 [    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), 
 cr=10c5387d 
 [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing 
 instruction cache 
  
 < everything fine - but then, rather late during the startup, strange things 
 begin to happen... > 
  
 [  135.063960] pca954x 0-0070: supply vdd not found, using dummy regulator 
 [  135.145929] i2c i2c-0: Added multiplexed i2c bus 1 
 [  135.153352] sdhci: Secure Digital Host Controller Interface driver 
 [  135.159601] sdhci: Copyright(c) Pierre Ossman 
 [  135.173430] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy 
 regulator 
 [  135.248511] i2c i2c-0: Added multiplexed i2c bus 2 
 [  135.269780] marvell-cesa f1090000.crypto: CESA device successfully 
 registered 
 [  135.290058] alg: ahash: mv-sha1 test failed (wrong result) on test vector 
 5, cfg="init+update+update+final two even splits" 
 [  135.290072] alg: ahash: mv-sha256 test failed (wrong result) on test 
 vector 
 1, cfg="init+update+final misaligned buffer" 
 [  135.290085] alg: self-tests for sha256 using mv-sha256 failed (rc=-22) 
 [  135.301293] alg: self-tests for sha1 using mv-sha1 failed (rc=-22) 
 [  135.312166] ------------[ cut here ]------------ 
 [  135.312170] WARNING: CPU: 0 PID: 950 at crypto/testmgr.c:5928 
 alg_test+0x70c/0x768 
 [  135.318719] ------------[ cut here ]------------ 
 [  135.324912] alg: self-tests for sha256 using mv-sha256 failed (rc=-22) 
 [  135.324915] Modules linked in: 
 [  135.329544] WARNING: CPU: 1 PID: 949 at crypto/testmgr.c:5928 
 alg_test+0x70c/0x768 
 [  135.337132]  ahci_mvebu(+) marvell_cesa(+) 
 [  135.341763] alg: self-tests for sha1 using mv-sha1 failed (rc=-22) 
 [  135.341767] Modules linked in: ahci_mvebu(+) marvell_cesa(+) soundcore 
 sdhci i2c_mux_pca954x(+) libahci_platform libdes i2c_mux orion_wdt spi_orion 
 sg loop drm nfsd configfs auth_rpcgss nfs_acl lockd grace sunrpc ip_tables 
 x_tables autofs4 ext4 crc16 
 mbcache jbd2 dm_crypt raid1 dm_raid raid456 libcrc32c crc32c_generic 
 async_raid6_recov async_memcpy async_pq async_xor xor xor_neon async_tx 
 raid6_pq md_mod dm_mod tag_dsa mv88e6xxx dsa_core selftests sd_mod hsr 
 bridge 
 stp llc ahci libahci libata marvell 
 mvmdio mdio_devres scsi_mod 
 [  135.348412]  soundcore 
 [  135.351470]  of_mdio 
 [  135.359062]  sdhci i2c_mux_pca954x(+) libahci_platform libdes i2c_mux 
 [  135.363181]  mvneta 
 [  135.369378]  orion_wdt 
 [  135.416219]  fixed_phy phylink fwnode_mdio 
 [  135.418584]  spi_orion 
 [  135.420856]  scsi_common 
 [  135.427240]  sg loop drm 
 [  135.429349]  libphy i2c_mv64xxx phy_armada38x_comphy aes_arm_bs 
 crypto_simd 
 cryptd aes_arm 
 [  135.429366] CPU: 1 UID: 0 PID: 949 Comm: cryptomgr_test Not tainted 
 6.12.35+deb12-armmp #1  Debian 6.12.35-1~bpo12+1 
 [  135.429374] Hardware name: Marvell Armada 380/385 (Device Tree) 
 [  135.429378] Call trace: 
 [  135.429382]  unwind_backtrace from show_stack+0x18/0x1c 
 [  135.429399]  show_stack from dump_stack_lvl+0x68/0x74 
 [  135.429408]  dump_stack_lvl from __warn+0x84/0x124 
  
 [continued in next message] 
  
 --- SoupGate-Win32 v1.05 
  * Origin: you cannot sedate... all the things you hate (1:229/2) 

[ list messages | list forums | previous | next | reply ]

search for:

328,119 visits
(c) 1994,  bbs@darkrealms.ca